![]() If you have not yet installed your SSD into the machine, you can do it now. The BIOS modification is complete and the machine now has NVMe support. Shut down the machine and remove the jumper from the FDO pins and move it back to the password reset pins if you took it from there. The FDO (Flash Descriptor Override) is in a different position depending on the model.įor the small form factor the jumper is between the Power Supply and the first PCI port, if you do not have a spare jumper you can borrow the jumper from the Password Header Pins: Locate the two pin service connector and put a jumper on it.Now that you have the machine prepared, you need to put the machine into service mode before you can proceed: Extract the zip file to a directory on your computer.Īlso download the NVME Driver which will be injected into the BIOS Image.įinally you will need UEFI Tool 0.28 to make the actual BIOS modification. Install the Required Drivers and Softwareīefore being able to read from or write to the BIOS, you need to install the Intel Management Engine Components.ĭownload the Intel Management Engine System Tools v9.1 r7, which contains the tools required to flash the new bios. Writing the modified BIOS back to the system.Adding NVMe driver support into the BIOS backup.Installing Required Software and drivers.This process involves the following steps: An NVMe to PCIe Adapter, I used this one from Amazon.In order to carry out this upgrade, you will need a few things: Modify the BIOS and Inject the NVMe Driver.Install the Required Drivers and Software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |